Advanced type dental air cavitron scaler MS-A2
Features
1. Standard M4/B2 available.
2. 3 tips attached.
3. Frequency: 6000Hz
4. It is quick couping & standard couping ISO B2/M4, easy for maintenance in daily life.
5. The best frequency. Slide-proof, it is comfortable to hold and easy to clean.
6. No vibration while running, offering a steady operation.
7. Suitable for disinfection of high-temperature steam at 135ºC. Conform to modem clinical requirement.
8. It is comfortable for both patients and operators.
9. Advanced type, economical design, easy and convenient to operate.
Introductions Connection Easily attachable to any 2-hole and 4-hole borden handpiece connector Cautions The air supply must be free of moisture. The water supply must be filtered Installation of scaler tip and operation Holding the tip-end, turn clockwise and fasten securely tighten with wrench. Shout off the water supply. Adjust air pressure to 2.8KG/CM2 Adjust the water flow until a fine mist ejects from the tip Lubrication Supply 2-3 drips into the drive air tube once or twice a day or spray lubricant into inlet hole of H. P. For about two seconds.
Technical Data
Available Air Pressure: 2~3.5KG/CM²
Air Volume: 15~24L/Min
Proper Air Pressure: 2.8KG/CM²
Sound Level: 65-68dB
Air Voltage: 2.2Mpa~2.5Mpa
Packing Size: 19x19x3cm